657 ADMINISTRADOR/A AVEVA BARCELONA

  • Jornada completa (allows remote)
  • BARCELONA
  • No. of Vacancies: 1
  • Experience: 1 - 3 Year
  • Posted 11 meses ago

Descripción:

Empresa internacional del sector Oil &Gas precisa Administrador AVEVA con inglés y francés y al menos 2 años de experiencia como administrador de E3D/PDMS suites.

Funciones:

  • Administración y desarrollo de aveva engineering.

Requisitos:

  • Ingeniero o Técnico Informático/ Mecánico.
  • Trainings de AVEVA.
  • IMPRESCINDIBLE: 2 o más años de experiencia cómo administrador de E3D/PDMS suites.
  • Imprescindible inglés y español.
  • Francés valorable.

DURACIÓN ESTIMADA INICIAL: 1 AÑO

INTERESADOS:

CV ACTUALIZADO A: trabajo@veringer.com

ASUNTO DEL MAIL: 657

Application Deadline: 30 abril, 2021

574 PIPING DESIGNER MADRID

  • Jornada completa
  • MADRID
  • No. of Vacancies: 1
  • Experience: 5 - 7 Years
  • Posted 2 años ago

Description:

Piping Designer to be in charge of installation design for assigned areas of on-shore process units.

Functions:

  • Learns and handles with all applicable job specs, piping classes, standards and working instructions that may be needed for the correct development of his assigned work.
  • Learns and handles with all applicable job specs, piping classes, standards and working instructions that may be needed for the correct development of his assigned work.
  • Review and Defines locally equipment and installation arrangement to full required detail.
  • Develops piping studies.
  • Develops 3D model for equipment and piping.
  • Review 3D design and comment for optimization.
  • Verifies isometric drawings.
  • Comments vendor drawings for assigned equipment.
  • Coordinates with other disciplines for relevant design interfaces.
  • Marks-up master documents, gets informed of changes and modifications, follows-up comments from other departments on assigned area and assures inclusion of required design changes.
  • Develops piping studies and support definition in assigned area.

Requirements:

  • Bachelor Degree, Technical Degree.
  • Minimum 5 years experience in similar function.
  • Experience in companies providing engineering services to the Chemical, Refining or Petrochemical Industry.
  • PDMS, E3D, SP3D.
  • AutoCAD, Microstation.

ESTIMATED DURATION 12 MONTHS

INTERESTED:

UPDATE CV: julia.taviel@veringer.com

MAIL SUBJECT: PIPING DESIGNER MADRID

Application Deadline: 31 diciembre, 2020

571 PIPING 3D DESIGNER BARCELONA

  • Jornada completa
  • BARCELONA
  • No. of Vacancies: 1
  • Experience: 3 - 5 Years
  • Posted 2 años ago

Description:

Piping Designer to be in charge of installation design for assigned areas of on-shore process units. Reports to Principal Piping Designer of assigned area.

Functions:

  • Learns and handles with all applicable job specs, piping classes, standards and working instructions that may be needed for the correct development of his assigned work.
  • Defines locally equipment and installation arrangement to full required detail.
  • Develops piping studies.
  • Develops 3D model for equipment and piping.
  • Extracts and verifies isometric drawings.
  • Develops general arrangement drawings.
  • Comments vendor drawings for assigned equipment.
  • Coordinates with other disciplines for relevant design interfaces.
  • Marks-up master documents, gets informed of changes and modifications, follows-up comments from other departments on assigned area and assures inclusion of required design changes.
  • Takes part in the different MTO activities, if requested to.
  • Develops piping studies and support definition in assigned area.

Requirements:

  • Bachelor Degree, Technical Degree.
  • Minimum 3- 5 years experience in similar function.
  • Experience in companies providing engineering services to the Chemical, Refining or Petrochemical Industry.
  • SP3D and/or E3D. AutoCAD, Microstation.
  • Fluent in English and/or Spanish.

ESTIMATED DURATION 1.5 YEARS

INTERESTED:

UPDATE CV: julia.taviel@veringer.com

MAIL SUBJECT: PIPING 3D DESIGNER BARCELONA

Application Deadline: 31 diciembre, 2020

559 PROYECTISTA CIVIL TEKLA MADRID

  • Jornada completa
  • MADRID
  • No. of Vacancies: 1
  • Experience: 3 - 5 Years
  • Posted 2 años ago

Descripción:

Empresa internacional precisa en Madrid delineante proyectista con al menos 5 años en diseño de estructuras de acero y hormigón con dominio de AutoCAD y TEKLA.

Funciones:

  • Diseño de estructuras de acero y hormigón (plataformas, estructuras de proceso, pipe-racks, etc.), cimentaciones (superficiales y profundas) y redes enterradas.

Requisitos:

  • Experiencia de al menos 5 años en diseño de estructuras de acero y hormigón.
  • Inglés intermedio escrito.
  • Dominio de AutoCAD.
  • Dominio de TEKLA.
  • E3D / EXCEL / WORD.
  • Dotes de comunicación. Capacidad de trabajar en equipo. Fácil desenvolvimiento en diferentes actividades en un mismo periodo de tiempo.

INTERESADOS:

CV ACTUALIZADO A: julia.taviel@veringer.com

ASUNTO DEL MAIL: PROYECTISTA CIVIL TEKLA MADRID

Application Deadline: 30 junio, 2020

549 ADMINISTRADOR AVEVA BARCELONA

  • Jornada completa
  • BARCELONA
  • No. of Vacancies: 1
  • Experience: 3 - 5 Years
  • Posted 2 años ago

 

Descripción:

Empresa internacional del sector Oil &Gas precisa Administrador AVEVA con inglés y francés y al menos 5 años de experiencia como administrador de E3D/PDMS suites.

Funciones:

  • Liderar la administración de softwares de ingeniería en proyectos internacionales y probablemente multicenter.

Requisitos:

  • Ingeniero o Técnico Informático/ Mecánico.
  • Trainings de AVEVA.
  • IMPRESCINDIBLE: 5 o más años de experiencia cómo administrador de E3D/PDMS suites.
  • PDMS, E3D.
  • Valorable: AVEVA NET, ENGINEERING, DIAGRAMS.
  • Imprescindible inglés y español.
  • Francés valorable.

DURACIÓN ESTIMADA INICIAL: 1 AÑO

INTERESADOS:

CV ACTUALIZADO A: julia.taviel@veringer.com

ASUNTO DEL MAIL: ADMINISTRADOR AVEVA BARCELONA

Application Deadline: 31 marzo, 2020

382 STRESS ENGINEER BARCELONA

  • Jornada completa
  • BARCELONA
  • No. of Vacancies: 1
  • Experience: 5 - 7 Years
  • Posted 2 años ago

 Description:

International company in Barcelona is looking for a Piping Stress Engineer to be in charge of technical activities related to piping stress in on-shore process units. Reporting to Project Stress Lead engineer.

Functions:

  • Learns and handles with all applicable job specs, piping classes, standards and working instructions that may be needed for the correct development of his assigned work.
  • Performs required stress calculations as per working instructions and project specifications.
  • Performs and transmits to Civil Dept sketches and significant design loads for structures, buildings and special stress.
  • Performs and transmits to Mechanical Dept orientation, shape and design load of piping stress clips and nozzles.
  • Follows-up to obtain approval of loads out of spec.
  • Cooperates with piping designers for the selection of optimal routings to simplify stress design and erection works.
  • Prepares Data Sheets for itemised equipment.
  • Verifies comments and follows-up piping studies and drawings, for correct inclusion of stress and civil requirements on stress.

Requirements:

  • Minimum 5 years experience in similar function.
  • Experience in companies providing engineering services to the Chemical, Refining or Petrochemical Industry.
  • Knowledge of International Codes,  ASME B31.1 and B31.3, ASNI and ASME standard,  API 610, etc.
  • Experience as field stress engineer or in piping erection will be valuable.
  • Knowledge and skills for CAESAR II.
  • Knowledge for Supports module of 3D software MDS (PDMS/E3D).
  • Fluent in Spanish and English and/or French.

ESTIMATED DURATION: 12-18 MONTHS

INTERESTED:

UPDATE CV A: julia.taviel@veringer.com

MAIL SUBJECT:  STRESS ENGINEER BCN

Application Deadline: 31 diciembre, 2019

373 PIPING 3D DESIGNER BARCELONA

  • Jornada completa
  • BARCELONA
  • No. of Vacancies: 1
  • Experience: 3 - 5 Years
  • Posted 2 años ago

Description:

Piping Designer to be in charge of installation design for assigned areas of on-shore process units. Reports to Principal Piping Designer of assigned area

Functions:

  • Learns and handles with all applicable job specs, piping classes, standards and working instructions that may be needed for the correct development of his assigned work.
  • Review and Defines locally equipment and installation arrangement to full required detail.
  • Develops piping studies.
  • Develops 3D model for equipment and piping.
  • Review 3D design and comment for optimization.
  • Verifies isometric drawings.
  • Comments vendor drawings for assigned equipment.
  • Coordinates with other disciplines for relevant design interfaces.
  • Marks-up master documents, gets informed of changes and modifications, follows-up comments from other departments on assigned area and assures inclusion of required design changes.
  • Develops piping studies and support definition in assigned area.

Requirements:

  • Bachelor Degree, Technical Degree.
  • Minimum 3-5 years experience in similar function.
  • Experience in companies providing engineering services to the Chemical, Refining or Petrochemical Industry.
  • SP3D and/or E3D.
  • AutoCAD, Microstation.
  • Fluent in English and/or Spanish.

ESTIMATED DURATION 1.5 YEARS

INTERESTED:

UPDATE CV: julia.taviel@veringer.com

MAIL SUBJECT: PIPING 3D DESIGNER BARCELONA

Application Deadline: 31 diciembre, 2019

311 STRESS TARRAGONA

  • Jornada completa
  • TARRAGONA
  • No. of Vacancies: 1
  • Experience: 5 - 7 Years
  • Posted 3 años ago

Descripción:

Empresa internacional del sector Oil &Gas precisa cubrir una posición de stress en Tarragona. Se precisa al menos 5 años de experiencia en posición similar, inglés, CAESAR II y SW 3D para soportes.

Funciones:

  • Manejo de todas las especificaciones de trabajo aplicables, clases de tuberías, normas e instrucciones de trabajo que pueden ser necesarias para el correcto desarrollo de su trabajo asignado.
  • Cálculos de estrés requeridos según las instrucciones de trabajo y las especificaciones del proyecto.
  • Realiza y transmite a la orientación mecánica de Dept. la forma y la carga de diseño de las pinzas de tensión de tubería y boquillas.
  • Seguimiento para obtener aprobación de cargas fuera de especificación.
  • Coopera con diseñadores de tuberías para la selección de rutinas óptimas para simplificar el diseño del estrés.
  • Preparativos Hojas de datos para equipos detallados.
  • Verificación de comentarios y seguimiento de estudios de tuberías y dibujos, para la correcta inclusión de estrés y requisitos civiles sobre el estrés.
  • Análisis de stress en sistemas de tuberías con CAESARII v.5 o superior o Caepipe.
  • Diseño y gestión de planos de soportes.

Requisitos:

  • Grado superior de formación profesional en Construcción/ Ingeniería Técnica de Construcción.
  • Experiencia de al menos 5 años realizando las funciones detalladas.
  • Nivel alto de Ingles.
  • Nivel avanzado en herramientas ofimáticas.
  • Conocimiento y manejo de CAESAR II V.5.
  • Conocimiento de módulo de Soportes en 3D (PDMS/E3D).
  • Manejo de inglés y español, deseable francés.

Application Deadline: 4 junio, 2019

310 PIPING 3D DESIGNER TARRAGONA

  • Jornada completa
  • TARRAGONA
  • No. of Vacancies: 1
  • Experience: 3 - 5 Years
  • Posted 3 años ago

Description:

Piping Designer to be in charge of installation design for assigned areas of on-shore process units. Reports to Principal Piping Designer of assigned area.

Functions:

  • Learns and handles with all applicable job specs, piping classes, standards and working instructions that may be needed for the correct development of his assigned work.
  • Learns and handles with all applicable job specs, piping classes, standards and working instructions that may be needed for the correct development of his assigned work.
  • Review and Defines locally equipment and installation arrangement to full required detail.
  • Develops piping studies.
  • Develops 3D model for equipment and piping.
  • Review 3D design and comment for optimization.
  • Verifies isometric drawings.
  • Comments vendor drawings for assigned equipment.
  • Coordinates with other disciplines for relevant design interfaces.
  • Marks-up master documents, gets informed of changes and modifications, follows-up comments from other departments on assigned area and assures inclusion of required design changes.
  • Develops piping studies and support definition in assigned area.

Requirements:

  • Bachelor Degree, Technical Degree.
  • Minimum 5 years experience in similar function.
  • Experience in companies providing engineering services to the Chemical, Refining or Petrochemical Industry.
  • PDMS or E3D.
  • SP3D valuable.
  • AutoCAD, Microstation.

ESTIMATED DURATION 6-12 MONTH MINIMUM

Application Deadline: 4 julio, 2019

244 PROYECTISTA I&C (SP3D/E3D) MADRID

  • Jornada completa
  • MADRID
  • No. of Vacancies: 1
  • Experience: 3 - 5 Years
  • Posted 3 años ago

Descripción:

Empresa internacional precisa en Madrid proyectista en instrumentación con al menos 4 años de experiencia en oficina técnica de proyectos de OIL&GAS Y SP3D/ E3D.

Funciones:

  • Realización de esquemas eléctricos.
  • Cálculo de sección de cableado.
  • Routing de bandejas.
  • Especificación de instrumentos.
  • Listados de I/O.

Requisitos:

  • FPII en electricidad industrial o Ing. Técnico Industrial.
  • Mínimo 4 años de experiencia en oficina técnica de proyectos OIL&GAS.
  • SP3D/ E3D.
  • Realización de esquemas eléctricos.
  • Cálculo de sección de cableado.
  • Routing de bandejas.
  • Especificación de instrumentos.
  • Listados de I/O.

INTERESADOS:

CV ACTUALIZADO A: julia.taviel@veringer.com

ASUNTO DEL MAIL: PROYECTISTA I&C (SP3D/E3D) MADRID

Application Deadline: 1 septiembre, 2019